LOW SLOPE ROOFING The Eco-44 system is designed to be installed with all known flat roofing materials regardless of the roofing substrate or insulation thickness for new or existing (retrofit) solar panel applications, and is accepted by most major roofing material manufacturers without voiding warranties. The Eco-44 features a patented, watertight seal and has a large base with multiple fasteners designed to distribute compressive loads over most standard insulation.
LOW SLOPE ROOFING The Eco-65 system is designed to be installed with all known flat roofing materials regardless of the roofing substrate or insulation thickness for new or existing (retrofit) solar panel applications, and is accepted by most major roofing material manufacturers without voiding warranties.
The Eco-65 features a patented, watertight seal and has a large base with multiple fasteners designed to distribute compressive loads over most standard insulation.
SHINGLE OR SLATE ROOFING The QuikFoot system is designed to be installed on most shingle roofs for new or existing (retrofit) solar panel applications, and is accepted by most major roofing material manufacturers without voiding warranties. The QuikFoot system features a patented, watertight seal with two fastener holes provided. Both fasteners (self-drilling #15) must engage the rafter. The installer does not need to cut open the roof to properly install this bracket and can retrofit without removing shingles.
METAL ROOFING The Simple Seal bracket system is designed to be installed on most through fastened new or existing (retrofit) metal roofs for solar panel applications, and is accepted by most major roofing material manufacturers without voiding warranties. The Simple Seal system features a patented, watertight seal compatible with a variety of bracket options.
COMPOSITION SHINGLE OR METAL ROOFING The Conduit Mount Bracket utilizes EcoFasten Solar's patented watertight technology. It is embossed with a patented cone shape countersink and can be used as a watertight solution on a variety of roof types. The Conduit Mount Bracket can be used with GreenFasten™ GF1 flashing on a new or retrofit composition shingle roof, or with a Simple Seal bushing for use on metal roofing. The bracket is raised to lift electrical conduit off the roof, preventing the wiring from overheating. Conduit Clamp not included.
FEATURES / ADVANTAGES:
SIPS PANELS The Eco-44R-NDD is the perfect solution when installing solar roof mounts on Structurally Insulated Panels (SIPs). The base plate of the Eco-44R-NDD system requires 8 fasteners, allowing the system to be installed directly to the roof deck without engaging a rafter. ECO-44R-NDD can be used on new or existing (retrofit) roofs.
FEATURES / ADVANTAGES:
STANDING SEAM ROOFING ASG-U clamps, manufactured by sister company Alpine SnowGuards®, are efficient solar roof mount attachment options for any metal standing seam roof. Installation of the ASG-U clamps will not pierce the roofing material. ASG-U clamps are available in configurations for both vertical (double-lock) and horizontal (single lock) standing seams.
FEATURES / ADVANTAGES:
Clamp attaches mechanically with set screws
Easy, fast way to attach just about anything, to any roof
No adhesive which can be affected by changes in temperature or barometric pressure
Accepted by major roofing materials manufacturers without voiding warranties
CORRUGATED METAL ROOFING Our Simple Seal bracket with center lift utilizes 2 of our patented watertight Simple Seal bushings, and was engineered to be used on metal corrugated roofing, with fastener spacing that allows for two fasteners per metal purlin. Measures 3" L x 1" W x 1 23/50" H (including 3/8" - 16 Stud).
The Tile Conduit Mount can be used on all profiles of tile, and can be installed on new or retrofit installations. The system was designed to lift electrical conduit up and off the roof, preventing the wiring from overheating. Conduit Clamp not included.
The Stainless Steel Rock-It Inverter Clip bonds the solar module frame to micro inverters and power optimizers and is compliant with UL2703:2015 First Edition.
COMPOSITION SHINGLE ROOFING The GreenFasten™ GF2 bracket system is designed to be installed on most new or existing (retrofit) composition shingle roofs for solar panel applications, and is accepted by most major roofing material manufacturers without voiding warranties. The GreenFasten™ GF2 system features two patented attachment point watertight seals, compatible with a variety of bracket options.
SOLAR PANELS From our Sister Company, Alpine SnowGuards, Solar SnowMax was designed and engineered specifiaclly for use on solar panels. Fabricated from Aircraft Grade Aluminum for use on portrait or landscape solar panel orientation.
FLAT, W or S TILE ROOFING Flashing replaces one complete tile, and has been extensively tested for pullout and shear. Attaches to the roof deck with as little as 2 lag bolts. Multiple fastener holes in the system’s base plate allow for attachment into the rafter, regardless of the flashing alignment. Available in profiles for flat, W or S tile roofing applications. As with all of our products, the Tile Flashing System meets or exceeds all roofing industry best practices, and was engineered to be rugged, versatile, simple and secure. Made in the USA.
CORRUGATED METAL ROOFING Universal design works as a hinge to fit all profiles. North-South adjustment allows for ease of installation, and 5 fastener points ensure optimal strength. Pre-applied gasket tape prevents leaks. Attaches to the side of the ribs, not in the valley, where water flows and moisture accumulates. Ideal for both commercial and residential applications, with a strong pullout value. See it in action as seen at Intersolar 2014.
LOW-SLOPE OR FLAT ROOFING The SimpleGrip-SQ System is a solar roof mount, engineered and manufactured specifically for use on low-slope/flat roofs. The SimpleGrip System can be customized with different EcoFasten Solar attachment bracket options, providing a customized solution for most low slope roof applications.
SimpleGrip is designed to be attached to new or existing (retrofit) roofs.
SOLAR PANELS
Conforming to UL 2703 First Edition, Rock-It System 2.0 is our newest rail-free solar roof mount solution.
Like our original Rock-It System, the unique top-down leveling feature allows the installer to level the array during or after the install.
Rock-It System 2.0 employs a streamlined design for a lightweight, durable system, utilizes North-South adjustability and provides an extremely fast, easy, no-hassle installation.
Rock-It System 2.0 was designed for installation on new or existing (retrofit) composition shingle and tile roofs.
COMPOSITION SHINGLE OR TILE ROOFING Rock-It System is our all new rail-free solar roof mount solution that conforms to UL Subject 2703. The system has been certified to the UL1703 / UL 2703 Fire Certification standards, and holds a Class A designation when used with Type 1, listed PV modules.
Top-down leveling allows the installer the freedom to level during and/or after project completion, while the North-South adjustability of up to 4" provides an extremely fast, easy, no-hassle installation.
Rock-It System was designed for installation on new or existing (retrofit) composition shingle roofs.
COMPOSITION SHINGLE ROOFING The GreenFasten™ GF1 bracket system is designed to be installed on most new or existing (retrofit) composition shingle roofs for solar panel applications, and is accepted by most major roofing material manufacturers without voiding warranties. The GreenFasten™ GF1 system features a patented, watertight seal compatible with a variety of bracket options. Backed by IAPMO Certification. Watch the install video here.
Owners, investors, and insurers can reduce exposure to foundation failure risk or implement cost effective failure abatement. Aquasoli’s risk assessment and mitigation strategies can save thousands on the dollar over failure remediation. We can screen a single PV facility or an entire portfolio for hidden liability.
The cost and time pressures inherent in PV projects often interfere with deploying proven reliable foundation technologies. Geotechnical consultants with deep and solar specific experience are rare. Consequently ground mount PV projects and facilities can hide latent foundation failure risk. The cost of remediating foundation failure is many times the cost of risk assessment and abatement: millions versus thousands of dollars.
To secure profit and long-term reliability, our phased approach starts with risk screening and ends at the abatement level required for satisfactory mitigation. This approach optimizes risk reduction for each dollar spent...
Developers, EPCs and Investors can vet sites faster and more accurately with AquaSoli’s Pre-Site Assessment Services and support purchase negotiations with our Permit-Ready Site Assessment Services. We reduce risk by assessing development potential from the ground up.
Pre-Site Assessment
Fast and accurate pre-site assessment vetting reduces investment risk and project development costs by aiding early go/no go decisions. Starting with just an address, AquaSoli analyzes remote site data and provides first order foundation, layout and site designs with estimates for production capacity and development costs.
Permit-Ready Site Assessment
Third party review of permit-ready sites characterizes investment value. Existing design studies are evaluated and pertinent data is leveraged to prepare independent conceptual design and estimates. Quantified findings are used to verify vendor claims.
Developers and EPCs can establish sole source responsibility for geotech, foundations and project coordination to optimize performance and reduce failure risk.
AquaSoli combines geotech, load testing, foundation design and installation QAQC into an accountable project deliverable. Our comprehensive site analysis results in specific recommendations that will help EPCs make project-enhancing design decisions.
The Ground Component consists of the interrelated elements that effect foundation performance and cost:
• Geotech, load testing, foundation design and installation QAQC
• Rack selection and layout
• Civil/site design and grading
• Storm water management and O&M
Optimizing this Ground Component minimizes foundation failure risk and drives project profit and performance.
TÜV Rheinland can assist energy companies and manufacturers obtain certification for CSP technology.
TÜV Rheinland offers a wide range of services for the testing and certification of your PV modules.
TÜV Rheinland provides testing and certification services for Solar Thermal Systems.
Ensure safety and reliability with TÜV Rheinland's testing and evaluation of Solar Power Stations.
Let TÜV Rheinland, market leader in testing Photovoltaic products, test your Photovoltaic components.
SOLON Andromeda is an innovative system using a modular approach for power plant design.
The individual components no longer have to be laboriously designed for each individual project , but rather their interaction and compatibility have already been exhaustively matched and tested, combining them into turnkey units for maximum performance. These 1 MW clusters, the SOLON Andromeda building block, can be scaled up to any power plant size, and can also still be adapted to individual site conditions. That saves time and money.
From start to finish SOLON manages your project with experience and guarantees. With over 250MW of systems installed worldwide, and over 1GW of modules producing power, SOLON provides the know-how to complete your project on-time and on-budget.
Revolutionizing rooftops, SOLON SOLquick's innovative design for flat roofs integrated the solar module and mount into one unit for a fast, easy and tool-free installation. Frameless modules are installed on the unit an an inclination of 10 degrees to ensure maximum area and energy optimization. The unique flat-roof system is suitable for all roof types with a carrying load capacity of less than 2.8 lbs psf.
Whatever the area, SOLON has a solution for your PV system needs.
Trinamount III installs up to 4 times faster than conventional mounting systems. Auto-grounded hardware requires only a single ground lug per horizontal row. In total, the Trinamount III system requires only seven different parts: this means 80% fewer parts than conventional systems and 66% fewer SKUs to process.
Trinamount II installs up to 4.5 times faster than conventional mounting systems and offers retail savings of $0.30-0.50 per watt. Auto-grounding hardware requires only a single ground bolt for every 72 modules. This reduces roof penetrations during installation by up to 35%, and overall parts count by 80%.
Trinamount I installs up to 5 times faster than conventional mounting systems. Trinamount connects directly to the module frame and eliminates the need for long rails.
Unlike other solar energy installations, PowerParasols are not hidden away from view like standard roof top systems or remote solar farm installations but are integrated into a community by covering parks, pedestrian malls, parking lots, campuses, playgrounds, viewing stands and other large open areas within cities and towns.
Shunt INSPECT
The shuntometer is a simple low cost set-up to determine the location of short-circuits (shunts). It allows a quick identification of material or processing problems and helps to prevent hot-spots which can occur when at the module level. The manual system can detect all major shunts in large area reverse biased solar cells. It therefore allows the imaging of large numbers of cells in a short time.
Our product range includes Solar Simulators for modules,
Benefits: Marketing Tool; Removes Contingent Liabilities on Balance Sheet; Provides Lender Security on System Performance
Benefits: Marketing Tool; Risk Transfer Mechanism
Utilizing the core benefits of Zep System II, Zep System III™ drastically reduces parts count, material cost, and installation time for commercial rooftop systems.
Zep System II offers the fastest and least expensive way to install PV arrays for flush-mount roof applications. Zep System II is designed to operate with Zep Compatible PV modules. Utilizing quarter-turn, rock-in, and drop-in connections, Zep System II eliminates the need for rails and separate grounding hardware while offering a superior aesthetic approach.
Utilizing the core benefits of Zep System II, Zep System III™ drastically reduces parts count, material cost, and installation time for commercial rooftop systems.
Zep System I offers the fastest and least expensive way to install PV arrays for flush-mount tile roof applications. With its ability to optimize attachment point spacing in both east-west and north-south axes, Zep System I can offer a 25% reduction in roof attachment points dramatically reducing the amount of time spent on the roof. With a series of drop-in, rock-in, and quarter-turn connections, Zep System I in-stalls without the use of lengthy rails and separate grounding hardware and is universally adaptable to third-party roof attachment solutions such as tile-hooks, hanger bolts, and flashed standoffs.
